|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
19-2027; Rev 1; 3/04 MAX2291 Evaluation Kit General Description The MAX2291 evaluation kit (EV kit) simplifies evaluation of the MAX2291 power amplifier (PA). It enables testing of the device's RF performance and requires no additional support circuitry. The EV kit's signal inputs and outputs use SMA connectors to facilitate the connection of RF test equipment. Three versions of the MAX2291 EV kit are available, covering N-CDMA, TDMA, and WCDMA/UMTS. Easy Evaluation of the MAX2291 +2.7V to +4.2V Single-Supply Operation Jumpers for Digital Power Control and Shutdown All Critical Peripheral Components Included Features Evaluates: MAX2291 Component Suppliers SUPPLIER Alpha ATC Coilcraft Kayama Murata PHONE 360-647-2360 949-583-9119 847-639-6400 219-489-1533 770-436-1300 FAX 360-671-4936 949-583-9213 847-639-1469 219-489-2261 770-436-3030 PART MAX2291NCDMAEVKIT MAX2291TDMAEVKIT MAX2291WCDMAEVKIT Ordering Information TEMP RANGE -40C to +85C -40C to +85C -40C to +85C IC PACKAGE 5 x 5 UCSP 5 x 5 UCSP 5 x 5 UCSP Component List N-CDMA DESIGNATION C17, C46, C47, C50, L8, L12, R2, IN2SMA C45, C54, C57, C64 C48 C49 C52 C56 C58 C62 C65 C66 QTY 0 DESCRIPTION Not installed 0.01F capacitors, Murata GRM36X7R103K16 470pF capacitor, Murata GRM36X7R471K50 6.0pF 0.1pF capacitor, Murata GRM36COG6R0B50 1.6pF 0.1pF capacitor, Murata GRM36COG1R6B50 10pF 0.1pF capacitor, Murata GRM36COG100B50 5.0pF 0.1pF capacitor, Murata GRM36COG5R0B50 0.1F capacitor, Murata GRM39X7R104K16 10F, 6.3V, 100m Taiyo Yuden ceramic capacitor, 1206 case size 22pF capacitor, Murata GRM36COG220J50 DESIGNATION C90 C91 4 1 1 1 1 1 1 1 1 C92 D1 L9, L15 L11 L14 R14 R16 R17, R18 R19 U1 VCC, GND VCC, GND IN1, OUT JU1, JU2 QTY 1 1 1 1 2 1 1 1 1 2 1 1 2 2 2 2 DESCRIPTION 4.7pF 0.1pF capacitor, ATC ATC100A4R7BW150XB 1.6pF 0.1pF capacitor, ATC ATC100A1R6BW150XB 0.75pF 0.1pF capacitor, Murata GRM36COGR75B50 Pin diode, Alpha SMP1320-079 0 5% resistors 2.55nH inductor, Coilcraft 0906-3 33nH inductor, Murata LQP10A33G00 27.4k 1% resistor (0402) 24k 5% resistor (0402) 15k 1% resistors (0402) 8.2k 1% resistor (0402) MAX2291 5 x 5 UCSPTM Banana jacks (red for VCC and black for GND), solder to 2-pin headers straight up 2-pin headers (0.1in centers) 0.031in edge-mount SMAs 3-pin headers (0.1in centers) UCSP is a trademark of Maxim Integrated Products, Inc. ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. MAX2291 Evaluation Kit Evaluates: MAX2291 Component List TDMA DESIGNATION C17, C49, C50, C52, C54, C58, D1, R2, IN2SMA, L9, L14, L15, R17, R19 C45, C57, C64 C48 C49 C56 C62 QTY DESCRIPTION WCDMA DESIGNATION C17, C46, C47, C50, L8, L12, D1, R2, IN2SMA, JU9, R15 C45, C54, C57, C64 C48 C49 C52 C56 C66 C58 C62 C65 C90 C91 C92 D1 L9, L15 L11 L14 R14 R16 R17, R18 R19 U1 VCC, GND VCC, GND IN1, OUT JU1, JU2 QTY 0 DESCRIPTION Not installed 0.01F capacitors, Murata GRM36X7R103K16 470pF capacitor, Murata GRM36X7R471K50 5.6pF 0.1pF capacitor, Murata GRM36COG5R6B50 1.3pF 0.1pF capacitor, Murata GRM36COG1R3B50 9.1pF 0.1pF capacitor, Murata GRM36COG9R1B50 22pF capacitor, Murata GRM36COG220J50 4.0pF 0.1pF capacitor, Murata GRM36COG4R0B50 0.01F capacitor, Murata GRM39X7R103K16 10F, 6.3V, 100m, Taiyo Yuden ceramic capacitor, 1206 case size 3.9pF 0.1pF capacitor, ATC ATC100A3R9BW150XB 3.3pF 0.1pF capacitor, ATC ATC100A3R3BW150XB 0.5pF 0.1pF capacitor, Murata GRM36COG0R5B50 Pin diode, Alpha SMP1320-079 0 5% resistors 2.55nH inductor, Coilcraft 0906-3 33nH inductor, Murata LQP10A33G00 20k 1% resistor (0402) 24k 5% resistor (0402) 15k 1% resistor (0402) 8.25k 1% resistor (0402) MAX2291 5 x 5 UCSP Banana jacks (red for VCC and black for GND), solder to 2-pin headers straight up 2-pin headers (0.1in centers) 0.031 in edge-mount SMAs 3-pin headers (0.1in centers) 0 Not installed 4 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 2 2 2 2 3 1 1 1 1 0.01F capacitors, Murata GRM36X7R103K16 470pF capacitor, Murata GRM36X7R471K50 5.0pF capacitor, Murata GRM36COG050C50 10pF 5% capacitor, ATC ATC650L100JW25 0.01F capacitor, Murata GRM39X7R103K16 10F, 6.3V, 100m, Taiyo Yuden ceramic capacitor, 1206 case size 22pF capacitor, Murata GRM36COG220J50 4.7pF 0.1pF capacitor, ATC ATC100A4R7BW150XB 1.8pF 0.1pF capacitor, ATC ATC100A1R8BW150XB 1.2nH, Murata LQP10A1N2B00 2.55nH inductor, Coilcraft 090633nH inductor, Murata LQP10A33G00 16.2k 1% resistor (0402) 24k 5% resistor (0402) 15k 1% resistor (0402) MAX2291 5 x 5 UCSP Banana jacks (red for VCC and black for GND), solder to 2-pin headers straight up 2-pin headers (0.1in centers) 0.031in edge-mount SMAs 3-pin header (0.1in centers) C65 1 C66 C90 C91 L9 L11 L14 R14 R16 R18 U1 VCC, GND VCC, GND IN1, OUT JU1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 _______________________________________________________________________________________ MAX2291 Evaluation Kit Component List KOREAN BAND CDMA DESIGNATION C17, C46, C47, C50, L8, L12, D1, R2, IN2SMA C45, C54, C57, C64 C48 C49 C52 C56, C66 C58 C62 QTY DESCRIPTION DESIGNATION C90 0 Not installed C91 4 1 1 1 2 1 1 0.01F capacitors, Murata GRM36X7R103K16 470pF capacitor, Murata GRM36X7R471K50 6.8pF 0.1pF capacitor, Murata GRM36COG6R8B50 1.6pF 0.1pF capacitor, Murata GRM36COG1R6B50 22pF capacitors, Murata GRM36COG220J50 5.0pF 0.1pF capacitor, Murata GRM36COG5R0B50 0.01F capacitor, Murata GRM39X7R103K16 10F, 6.3V, 100m, Taiyo Yuden ceramic capacitor, 1206 case size C92 D1 L9 L11 L14 L15 R14 R16 R17, R18 R19 U1 VCC, GND VCC, GND IN1, OUT JU1, JU2 1 1 1 1 1 1 1 1 1 2 1 1 2 2 2 2 QTY 1 DESCRIPTION 4.7pF 0.1pF capacitor, ATC ATC100A4R7BW150XB 1.8pF 0.1pF capacitor, ATC ATC100A1R8BW150XB 1.6pF 0.1pF capacitor, Murata GRM36COG1R6B50 Pin diode, Alpha SMP1320-079 0 5% resistor 2.55nH inductor Coilcraft 0906-3 33nH inductor, Murata LQP10A33G00 1.2nH inductor, Murata LQP10A1N2B00 27.4k 1% resistor (0402) 24k 5% resistor (0402) 15k 1% resistors (0402) 8.25k 1% resistor (0402) MAX2291 5 x 5 UCSP Banana jacks (red for VCC and black for GND), solder to 2-pin headers straight up 2-pin headers (0.1in centers) 0.031in edge-mount SMAs 3-pin headers (0.1in centers) Evaluates: MAX2291 C65 1 _______________________________________________________________________________________ 3 MAX2291 Evaluation Kit Evaluates: MAX2291 Quick Start MAX2291 EV kits are fully assembled and factory tested. Follow the instructions in the Connections and Setup section for proper device evaluation. 1) Connect a DC supply set to +3.5V (through an ammeter if desired) to the VCC and GND terminals on the EV kit. Do not turn on the supply. 2) Connect one RF signal generator to the IN1 SMA connector; do not turn on the generator's output. Set the generator for output frequency and power level according to Table 1. 3) Connect a 20dB pad to the OUT SMA connector on the EV kit. This is to prevent overloading of the power sensor and the power meter. 4) Connect a power sensor to the 20dB pad. 5) Connect the power sensor to a power meter. Set the power meter offset to 20dB and frequency according to Table 1. For more accuracy, measure the actual offset. 6) Connect jumpers JU1 and JU2 to make SHDN = VCC, MODE = GND. This sets the MAX2291 to highpower mode. The MAX2291 EV kit is shipped in this setting. 7) Turn on the DC supply. The supply current should read approximately 170mA. 8) Activate the RF generator's output. The power meter should read approximately +29dBm (N-CDMA). The supply current should increase to approximately 630mA (N-CDMA). See Table 1 for approximate readings in other modes. 9) Another method for determining gain is by using a network analyzer (optional). This has the advantage of displaying gain versus a swept-frequency band, in addition to displaying input return loss. Refer to the network analyzer manufacturer's user manual for setup details. Test Equipment Required This section lists the test equipment recommended to verify operation of the MAX2291. It is intended as a guide only, and some substitutions are possible: * One RF signal generator capable of delivering at least +5dBm of output power at the operating frequency (HPE4433B or equivalent) * One RF power sensor capable of handling at least +20dBm of output power at the operating frequency (HP 8482A or equivalent) * One RF power meter capable of measuring up to +20dBm of output power at the operating frequency (HP 437B or equivalent) * An RF spectrum analyzer that covers the MAX2291 operating frequency range, as well as a few harmonics (FSEB20, for example) * A power supply capable of up to 1A at +2.7V to +4.2V * An optional ammeter for measuring the supply current * Two SMA cables * One SMA 20dB pad * A network analyzer (HP 8753D, for example) to measure small-signal return loss and gain (optional) Connections and Setup This section provides a step-by-step guide to operating the EV kit and testing the device's function. Do not turn on the DC power or RF signal generators until all connections are made. Table 1. Typical Operating Conditions PARAMETER Frequency Signal Generator Power Output Power Supply Current N-CDMA 1880 +2 +29 630 TDMA 1880 +3 +30.5 800 KCDMA 1765 +2 +29 630 WCDMA 1950 +1 +28 480 UNITS MHz dBm dBm mA 4 _______________________________________________________________________________________ MAX2291 Evaluation Kit Evaluates: MAX2291 VCC VCC HIGH LOW VCC C65 10F GND SMA C62 0.1F D1 E1 C58 5.0pF OUTL GND GND GND GND GND C52 1.6pF C92 0.75pF L9 O VCC C4 R19 VCC 8.25k 1% C57 0.01F C56 10pF BIAS2L INL/SHDN C3 C2 R17 15k 1% VCC BIAS1L VCC C1 L15 O C54 0.01F ON OFF VCC B1 BIAS1H A5 R14 27.4k 1% C91 1.6pF C90 4.7pF OUT C66 22pF C64 0.01F JU2 VCC E5 A3 MODE GND VCC A1 C45 0.01F A2 U1 MAX2291 N.C. L11 2.55nH E3 B2 OUTH GND GND E2 L14 33nH C48 470pF INH A4 E4 D5 D1 B4 R18 15k 1% B3 C49 6.0pF VCC IN1 SMA C5 BIAS2H B5 VCC R16 24k JU1 Figure 1. MAX2291 N-CDMA EV Kit Schematic _______________________________________________________________________________________ 5 MAX2291 Evaluation Kit Evaluates: MAX2291 VCC E5 VCC VCC C65 10F GND SMA C62 0.01F C91 1.8pF C90 4.7pF OUT C66 22pF C64 0.01F A3 MODE GND VCC A1 C45 0.01F C49 5.0pF INH A4 IN1 SMA L14 33nH OUTH GND GND E2 C48 470pF L9 1.2nH U1 MAX2291 L11 2.55nH E3 B2 E1 N.C. OUTL BIAS1H A2 R14 16.2k 1% E4 D5 D1 B4 R18 15k 1% B3 GND GND GND GND GND A5 VCC VCC B1 C5 BIAS2H VCC BIAS2L INL/SHDN VCC B5 R16 24k C1 JU1 ON OFF C4 VCC C3 C57 0.01F C56 10pF C2 BIAS1L VCC Figure 2. MAX2291 TDMA EV Kit Schematic 6 _______________________________________________________________________________________ MAX2291 Evaluation Kit Evaluates: MAX2291 VCC VCC HIGH LOW VCC C65 10F GND SMA C62 0.01F D1 E1 C58 4pF OUTL GND GND GND GND GND C52 1.3pF C92 0.5pF L9 O VCC C4 R19 VCC 8.25k 1% C57 0.01F C56 9.1pF BIAS2L INL/SHDN C3 C2 R17 15k 1% VCC BIAS1L VCC C1 L15 O C54 0.01F ON OFF VCC B1 IN1 SMA BIAS1H A5 C91 3.3pF C90 3.9pF OUT C66 22pF C64 0.01F JU2 VCC E5 A3 MODE GND VCC A1 C45 0.01F A2 U1 MAX2291 N.C. L11 2.55nH E3 B2 OUTH GND NN.C.C INH GND E2 L14 33nH R14 20k 1% C48 470pF A4 E4 D5 D1 B4 R18 15k 1% B3 C49 5.6pF VCC C5 BIAS2H B5 VCC R16 24k JU1 Figure 3. MAX2291 WCDMA EV Kit Schematic _______________________________________________________________________________________ 7 MAX2291 Evaluation Kit Evaluates: MAX2291 VCC VCC HIGH LOW VCC C65 10F GND SMA C62 0.01F D1 E1 C58 5pF OUTL GND GND GND GND GND C52 1.6pF C92 1.6pF L9 O VCC C4 R19 VCC 8.2k 1% C57 0.01F C56 22pF BIAS2L INL/SHDN C3 C2 R17 15k 1% VCC BIAS1L VCC C1 L15 1.2nH C54 0.01F ON OFF VCC B1 BIAS1H A5 R14 27.4k 1% C91 1.8pF C90 4.7pF OUT C66 22pF C64 0.01F JU2 VCC E5 A3 MODE GND VCC A1 C45 0.01F A2 U1 MAX2291 N.C. L11 2.55nH E3 B2 OUTH GND GND E2 L14 33nH C48 470pF INH A4 E4 D5 D1 B4 R18 15k 1% B3 C49 6.8pF VCC IN1 SMA C5 BIAS2H B5 VCC R16 24k JU1 Figure 4. MAX2291 Korean CDMA EV Kit Schematic 8 _______________________________________________________________________________________ MAX2291 Evaluation Kit Evaluates: MAX2291 1.0" Figure 5. MAX2291 EV Kit Component Placement Guide-- Component Side 1.0" Figure 6. MAX2291 EV Kit PC Board Layout--Ground Plane Layer 2 1.0" Figure 7. MAX2291 EV Kit PC Board Layout--Ground Plane Layer 3 1.0" Figure 8. MAX2291 EV Kit PC Board Layout--Component Side _______________________________________________________________________________________ 9 MAX2291 Evaluation Kit Evaluates: MAX2291 1.0" Figure 9. MAX2291 EV Kit PC Board Layout--Secondary Side 1.0" Figure 10. MAX2291 EV Kit PC Board Layout--Back Side. Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 10 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2004 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products. |
Price & Availability of MAX2291WCDMAEVKIT |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |